IBM SC30-3681-08 manual List for protocol Brly, Link EOT, Number of pairs of SYNs, Remote Group

Con®guring and Monitoring BSC Relay
Cable Type
	The serial interface cable type.
Speed (bps)
	Lists the speed of the transmit and receive clocks.
Code The code type used by this device.
Link EOT
	Speci®es whether EOT transmissions are combined with poll and select
	transmissions when the transmissions occur back-to-back.
Number of pairs of SYNs
	The number of pairs of synchronization characters the system sends before
	any data.
List (for protocol BRLY)
Use the list command to display the con®guration of a speci®c group or of all
groups.
Syntax:
list				all
				group group#
all	Displays the con®gurations of all groups.
	Example: list all
			BSC Relay Configuration
	Local	Group	Port		Net	Remote	Station	IP
	Group	Type	Status		Number	Group	Address	Address
	------	-----	-----------------		------	------	-------	---------------
	1 (E)	MULTI	Local	PRMRY (E)	1
			Remote SCNDRY (E)			1	C1	6.6.6.1
	2 (E)	MULTI	Local	PRMRY (E)	1
			Remote SCNDRY (E)			2	C5	6.6.6.2
	E = enabled, D = disabled
	Note: The system does not display the remote port's net number at the
		local port as it is not part of the local group's con®guration.
	Group Number
		Indicates the group number and the status of the group, enabled
		(E) or disabled (D).
	Port Status
		Indicates the type of port (local/remote primary/secondary) and its
		status, enabled (E) or disabled (D).
	Net Number
		Indicates the interface number of the local port.
	Remote Group
		The number of the group at the remote router.
	Address Character
		The address character assigned to one secondary station.
	IP Address
		Indicates the IP address of the remote port.

572MRS V3.2 Software User's Guide