SNRM The maximum number of times the router will send an SNRM(E) frame
without receiving a response before timing out. Avalue of 0 indicates that
the router will retry indefinitely.
Poll retry
The maximum number of times the router polls the station without receiving
a response before timing out. Avalue of 0 indicates that the router will
continue to retry indefinitely.
Note: Physical layer parameters such as duplex type,speed,cable type,
encoding,clocking, and inter-frame delay do not apply for SDLC dial
circuit interfaces and are not displayed by the list link command.
station
all
or
address
or

link station name

Displays information for the specified SDLC link station or for all link
stations.
Example:
list station c1
Address Name Status Max BTU Rx Window Tx Window
------- ------ ------ ------- --------- ---------
C1(00) SDLC_C1 Enabled 2005 7 7
Example:
list station all
Address Name Status Max BTU Rx Window Tx Window
------- -------- ---------- ------- --------- ---------
C1(00) SDLC_C1 ENABLED 2005 7 7
C3(F3) SDLC_C3 DISABLED 2009 7 7
Address
The address of the SDLC link station. The address in parentheses
is the group address of the station. A(00) indicates that a group
address is not defined.
Name The character string name designation of SDLC link station.
Status The status of the SDLC link station, ENABLED or DISABLED.
Max BTU
The frame size limit of the station. This frame size must not be
larger than the maximum Basic Transmission Unit (BTU) packet
size configured with the set link frame-size command.
Rx Window
The size of the receive window.
Tx Window
The size of the transmit window.
Set
Use the set command to configure specific information for one or all SDLC link
stations.
Syntax:
set link cable*
link clocking*
link duplex*...
link encoding*...
Configuring SDLC Interfaces
544 MRS V3.2 Software User’s Guide