IBM SC30-3681-08 manual Clear, Monitoring Frame Relay Interfaces

Monitoring Frame Relay Interfaces

Table 60. Frame Relay Monitoring Commands Summary (continued)

Command Function

Trace	Enables packet tracing capability for individual circuits or for the entire
	interface.
Exit	Returns you to the previous command level. See ªExiting a Lower Level
	Environmentº on page 11.

Note: In this section, the terms circuit number and PVC are equivalent to the term data link circuit identi®er (DLCI).

Clear

Use the clear command to zero statistical counters on the Frame Relay interface.

Note: Statistics can also be cleared by using the OPCON clear command.

Syntax:

clear

Disable

Use the disable command to disable the Frame Relay CIR monitoring and congestion monitoring features.

The disable command dynamically changes the router con®guration. These changes will be lost when the router is restarted.

Syntax:

disablecir-monitor

cllm

congestion-monitor

notify-fecn-source

throttle-transmit-on-fecn

Enable

Use the enable command to enable the Frame Relay CIR monitoring and congestion monitoring features.

The enable command dynamically changes the router con®guration. These changes will be lost when the router is restarted.

Syntax:
enable	cir-monitor
	cllm
	congestion-monitor
	notify-fecn-source
	throttle-transmit-on-fecn

Chapter 31. Con®guring and Monitoring Frame Relay Interfaces 433