Protocol Broadcast
Indicates whether protocols such as IP RIP can function over the
Frame Relay interface, yes or no.
Emulate multicast
Indicates whether the multicast emulation feature is enabled on
each active PVC, yes or no.
Congestion Monitoring
Indicates whether the congestion monitoring feature that responds
to network congestion is enabled, yes or no.
CIR monitoring
Indicates whether the circuit monitoring feature that enforces the
transmission rate is enabled, yes or no.
Notify FECN Source
Indicates whether this device sets a BECN bit on the first packet
destined to a device from which the router received a packet with
the FECN bit set.
Throttle Transmit on FECN
Indicates whether the device will
throttle down
the transmission of
packets in response to a packet with a FECN bit set on.
Data compression
Indicates whether this interface has data compression enabled.
Data encryption
Indicates whether this interface has data encryption enabled and
the number of circuits that are encryption capable.
Orphan compression
Indicates whether orphan circuits on this interface will have data
compression enabled.
Note: Enabling compression on orphan circuits will decrease the
number of available compression contexts available for the
native PVCs on the device.
Orphan compression applies to both PVCs and SVCs.
Compression circuit limit
Indicates the maximum number of circuits that can participate in
data compression.
Number of compression VCs
Indicates the current number of VCs supporting data compression.
P1 allowed
Indicates the number of allowable PVCs and SVCsfor use with this
interface.
Timer T1 seconds
Indicates the frequency with which the Frame Relay interface
performs a sequence number exchange with the Frame Relay
switch LMI entity.
Counter N1 increments
Indicates the number of T1 timer intervals which must expire before
a complete PVC LMI status enquiry is made.
Configuring Frame Relay Interfaces
422 MRS V3.2 Software User’s Guide
|
|
|
|