Remote X.25 DTE address [ ]? 108
3. A PVC range can be defined through the PVC range start and PVC
range end parameters. The same number of circuits must be defined in
the local PVC range as in the remote PVC range. For example, if one
circuit is defined in the local PVC range, one circuit must be defined in
the remote PVC range.
4. The PVCs defined must fall within the range of 1 to 255.
Note: When you add PVCs to the router configuration, you also must
configure the PVC in X.25. For details on configuring X.25 interfaces,
refer to the
Software User’s Guide
Change
Changes a peer router, remote DTE, or PVC from the XTP configuration.
Syntax:
change peer-router
remote-dte
pvc
peer-router
Changes specific peer routers from the XTP configuration.
Example:
change peer-router
Router IP Address [0.0.0.0]?128.185.100.2
remote-dte
Changes specific remote DTEs in the XTP configuration.
Example:
change remote-dte
DTE address [ ]?401
Peer router's internal IP Address [0.0.0.0]?128.185.100.2
Peer router's internal IP Address [0.0.0.0]?
pvc Changes PVC definitions for all PVCs in the range defined by the Local
PVC Range Start parameter.
Example:
change pvc
Local PVC Range Start [1]?1
Local DTE address [ ]?301
Delete
Deletes a local DTE, peer router, remote DTE, or PVC from the XTP configuration.
Syntax:
delete bi-cug
cug
local-dte
peer-router
XTP Configuring Commands (Talk6)
378 MRS V3.2 Software User’s Guide
|
|
|
|
|
|
|
|
|