Important!

Install the CD Drivers before Connecting the Hardware to the PC.

Quick Start Guide

Ulinx, USB to 1 Port Serial and 1 & 2 Port DIN Converters

1

Items Included

USB to Serial Device

One Meter USB Cable

CD ROM with Drivers

This Quick Start Guide

2 General

1.One USB port is required for each installed device. The USB port can be native to the PC or it can be a USB port from an installed USB hub to the PC.

Note: The devices work with USB 1.1 or 2.0 ports but have a maximum USB data rate of 12Mbps.

Surrounding Air Ambient Temperature: 0 to 70° C

3 Installation

INSERT THE DRIVER CD INTO YOUR CD-ROM BEFORE PLUGGING THE HARDWARE INTO THE PC.

If you have inserted the hardware first and the Found New Hardware Wizard launched, click cancel to exit the wizard.

P#8506R2 ULINX 1&2 PORT_0712qsg

After inserting the CD, the Ulinx USB Driver Installation wizard should launch automatically. If not, navigate to the CD-ROM drive and run setup.exe. To find your CD-ROM drive, double click “Computer” or “My Computer” on your desktop, then double click on your CD-ROM drive (usually D:).

In Windows Vista, if the following dialog appears, click “Run setup.exe”.

When the Ulinx USB Driver Installation Wizard appears, follow the wizard to complete the installation.

When the Ulinx USB Driver Installation Wizard is done installing the driver, using the included USB cable plug the USB hardware into an available USB port on the PC.

Page 1
Image 1
B&B Electronics P#8506R2 quick start General, Installation