Setting up and connecting

 

 

 

Disposal of the packaging

 

GB

 

 

IE

 

The packaging protects the appliance from transport damage. The packaging

 

CY

 

 

 

materials are selected from the point of view of their environmental friendliness

 

 

 

 

 

 

and disposal technology and are therefore recyclable.

 

 

 

The recirculation of packaging into the material circuit saves on raw material

 

 

 

and reduces generated waste. Dispose of packaging material that is no longer

 

 

 

needed according to the regionally established regulations.

NOTICE

If possible preserve the appliance's original packaging during the warranty period so that in the case of a warranty claim you can package the appliance properly for return.

Requirements on the Installation Location

DANGER

Risk of fatal electrocution!

Should the appliance make contact with water whilst connected to the mains power supply there exists a potentially fatal risk!

Observe the following safety notices to avoid electrical hazards:

All parts containing electrical components, except remote control devices, should be located or secured so that they cannot fall into the bathtub.

Parts that are charged with standard mains power, i.e. all parts except those supplied with the extra low safety voltage of up to 12 V, MUST be inacces- sible to people in the bath.

For a safe and error-free operation of the appliance, installation location must fulfill the following conditions:

Never place the pump above the bathtub.

Place the pump on a firm, level and dry surface.

Place the pump in such a way that the suction opening under of the pump housing cannot be covered (such as by a bath mat).

Do not place the pump in a wet environment or in a spraywater area.

Do not place the pump directly next to a radiator or a radiant heater.

The mains power socket must be protected by an FC protector switch (RCD) with a rated residual current not exceeding 30 mA.. It must be easily accessible, so that the plug can be quickly removed in an emergency.

Secure the air-bubble mat to the floor of your bathtub with the rear suction cups.

8

SLB 450 A1

Page 10
Image 10
Silvercrest SLB 450 A16 operating instructions Disposal of the packaging, Requirements on the Installation Location