GB
IE
CY
Handling and operation
Function selection with the remote control
IMPORTANT
Risk of damage from water intrusion.
Never submerge the appliance or the remote control in water or other fluids. The appliance or the remote control could be irreparably damaged.
►Using the suction cups on the back of it, attach the remote control onto the tiles next to your bath tub.
NOTICE
►To ensure faultfree operation of the remote control 9 , it must be held during operation so that it points directly to the pump 
.
Switch the pump 
on with one press of the function button 10. The LED operation indicator 5 on the pump blinks green, and the pump is operating at the lowest level of intensity.
By once again pressing the function button 10 the LED operation indicator 5 on the pump blinks red and the pump switches to the high intensity level.
By pressing the function button 10 once again, the appliance switches into the programme mode. The LED operation indicator 5 on the pump blinks orange, and the appliance is now working in the massage mode. With this, the appliance works by alternating between the low and high intensity levels.
Press the function button 10 a fourth time to switch the appliance off. The LED operation indicator 5 on the pump extinguishes.
NOTICE
►The appliance switches off automatically after 20 minutes usage time.
14 | SLB 450 A1 |
