Silvercrest SLB 450 A16 operating instructions Troubleshooting, Malfunction causes and remedies

GB

IE

CY

Troubleshooting

Malfunction causes and remedies

The following table will help with localising and eliminating minor malfunctions:

Defect	Possible cause	Solution
	The plug is not inserted.	Insert the plug into a mains power
		socket.
	Mains power socket does	Check the fuses.
	not supply any power.
Appliance does
	The remote control 9
not switch on.		On activation, aim the remote control
	was not directed at the
		at the pump .
	appliance.
	The battery in the remote	Insert a new battery into the remote
	control is empty.	control.
Appliance does not	The battery in the remote	Insert a new battery into the remote
	control is empty.	control.
let itself be switched	Function button 3 not	Press the function button repeatedly
off.
	pressed often enough.	until the appliance switches off.
There are no air	Appliance not switched on.	Switch the appliance on.
		Properly connect/lock the air hose
bubbles exiting the	Air hose 8 not properly
		to the air-bubble mat 6 and to the
air-bubble mat.	connected.
		pump .
	Suction cups of the air-	Moisten the suction caps on the air-
	bubble mat are not clinging
		bubble mat and then press it firmly
	firmly to the floor of the
Air-bubble mat does		onto the bottom of the bath tub.
	bath.
not adhere to the
	Soap, shampoo or hair
floor of the bathtub.		Remove the soap, shampoo or hair
	remnants prevent firm
		remnants/rinse the bath tub out before
	suction to the bottom of
		pressing the air-bubble mat down.
	the bath tub.
Appliance stops	Cooling time after	After use, allow the pump to cool
		for at least 10 minutes and first then
automatically.	operation too short.
		restart it if still needed.

NOTICE

►If you cannot solve the problem with the aforementioned methods, please contact Customer Service.

16 SLB 450 A1