IBM SC30-3681-08 manual ELS Net Filter Monitoring Commands, Trace-Status, View, Earch hexstring

ELS Monitoring Commands (Talk 5)

Tracing event LEC.12: control frames over ATM Forum LEC: interface 1 Note that if the user DISABLEs and TESTs this LEC interface,

the LEC trace settings from Talk 6 Config will take effect.

Example:

subsystems	summary
Subsystems	Being Traced
ATM	net	number =	0, VPI Range:	0	-	0
			VCI Range:	16	-	16
LEC	net	number =	1

Trace-Status

Use the trace-statuscommand to get updated information regarding packet trace.

Syntax:

trace-status Example:

trace--------------------------status	Configuration
Trace Status:OFF	Wrap Mode:OFF		Decode Packets:OFF HD Shadowing:OFF
RAM Trace Buffer Size:0 Maximum Trace Buffer File Size:10000000
Max Packet Bytes Trace:256		Default Packet Bytes Traced:100
Trace File Record Size:2048		Stop Trace Event: None
Maximum Hours to HD Shadow: 24
------------------------	Run-time Status ----------------------------
Packets in RAM Trace Buffer:0			Free Trace Buffer Memory:0
Trace Errors:0	First Packet:0		Last Packet:0
Trace Records Stored on HD:0		Trace Buffer File Size:0
HD-Shadowing Time Exceeded? NO

Has Stop Trace Event Occurred? NO

View

Use the view command to enter the View Captured Packet Trace Buffers

Monitoring.

For an explanation of the view commands, see ªViewº on page 204.

Syntax:
view	current
	first
	jump
	last
	next
	prev
	search hexstring
	exit

ELS Net Filter Monitoring Commands

This section describes explains the commands to manipulate ELS net ®lters. To

enter the ®lter environment, enter the®lter net command at the ELS> prompt. Enter the monitoring commands at the ELS Filter net> prompt.

Chapter 13. Con®guring and Monitoring the Event Logging System (ELS) 207