Transition Networks SISGM1040-162D manual Commands Level, Exec, Configure parameters

Transition Networks SISGM1040-162D-LR

The following table lists the CLI commands and description.

Commands Level

Modes		Access	Prompt	Exit	About This Mode1
		Method		Method
					The user commands
					available at the user
					level are a subset of
		Begin a		Enter logout	those available at the
User EXEC	session with		switch>
				or quit.	privileged level.
		your switch.
					Use this mode to
					• Perform basic tests.
					• Displays system
					information.
					The privileged
		Enter the			command is advance
					mode
		enable		Enter
Privileged
			switch#	disable to	Privileged this mode
EXEC		command
				exit.	to
		while in user
		EXEC mode.			• Displays advance
					function status
					• Save configures
		Enter the		To exit to
		configure
Global				privileged	Use this mode to
			switch
Configuratio		command		EXEC	configure parameters
			(config)#
n		while in		mode, enter	that apply to your
		privileged		exit or end	switch as a whole.
		EXEC mode.
		Enter the vlan		To exit to
		database
VLAN			switch	user EXEC	Use this mode to
database		command	(vlan)#	mode, enter	configure VLAN-
		while in		exit.	specific parameters.
		privileged
Technical Support: 1-800-260-1312				International: 00-1-952-941-7600

20