Transition Networks SISGM1040-162D spanning-tree hello, spanning-tree forward, stp-path-cost

Transition Networks			SISGM1040-162D-LR
spanning-tree hello-	G	Use the spanning-tree	switch(config)#spanning-tree
time [seconds]		hello-time global	hello-time 3
		configuration
		command to specify
		the interval between
		hello bridge protocol
		data units (BPDUs).
spanning-tree forward-	G	Use the spanning-tree	switch(config)#spanning-tree
time [seconds]		forward-time global	forward-time 20
		configuration
		command to set the
		forwarding-time for the
		specified spanning-
		tree instances. The
		forwarding time
		determines how long
		each of the listening
		and
		learning states last
		before the port begins
		forwarding.
stp-path-cost	I	Use the spanning-tree	switch(config)#interface
[1~200000000]		cost interface	fastEthernet 2
		configuration	switch(config-if)#stp-path-cost 20
		command to set the
		path cost for Spanning
		Tree
		Protocol (STP)
		calculations. In the
		event of a loop,
		spanning tree
		considers the path
		cost when selecting
		an interface to place
Technical Support: 1-800-260-1312			International: 00-1-952-941-7600

31