Transition Networks SISGM1040-162D manual Trunk Commands Set

Transition NetworksSISGM1040-162D-LR

Trunk Commands Set

Command	Level	Description	Example
aggregator priority	G	Set port group system	switch(config)#aggregator priority
[1~65535]		priority	22
aggregator activityport	G	Set activity port	switch(config)#aggregator
[Group ID]			activityport 2
[Port Numbers]
aggregator group	G	Assign a trunk group	switch(config)#aggregator group
[GroupID] [Port-list]		with LACP active.	1 1-4 lacp workp 2
lacp		[GroupID] :1~4	or
workp		[Port-list]:Member port	switch(config)#aggregator group
[Workport]		list, This parameter	2 1,4,3 lacp workp 3
		could be a port
		range(ex.1-4) or a port
		list separate by a
		comma(ex.2, 3, 6)
		[Workport]: The
		amount of work ports,
		this value could not be
		less than zero or be
		large than the amount
		of member ports.
aggregator group	G	Assign a static trunk	switch(config)#aggregator group
[GroupID] [Port-list]		group.	1 2-4 nolacp
nolacp		[GroupID] :1~4	or
		[Port-list]:Member port	switch(config)#aggregator group
		list, This parameter	1 3,1,2 nolacp
		could be a port
		range(ex.1-4) or a port
		list separate by a
		comma(ex.2, 3, 6)

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

27