Transition Networks SISGM1040-162D Vlan Commands Set, GroupID, Valn, Group Name, PortNumbers

Transition Networks			SISGM1040-162D-LR
show aggregator	P	Show the information	switch#show aggregator 1
		of trunk group	or
			switch#show aggregator 2
			or
			switch#show aggregator 3
no aggregator lacp	G	Disable the LACP	switch(config)#no aggreator lacp
[GroupID]		function of trunk group	1
no aggregator group	G	Remove a trunk group	switch(config)#no aggreator
[GroupID]			group 2

VLAN Commands Set

Command	Level	Description	Example
vlan database	P	Enter VLAN configure	switch#vlan database
		mode
Vlanmode	V	To set switch VLAN	switch(vlan)#vlanmode portbase
[portbase 802.1q		mode.	or
gvrp]			switch(vlan)#vlanmode 802.1q
			or
			switch(vlan)#vlanmode gvrp
no vlan	V	No VLAN	Switch(vlan)#no vlan
Ported based VLAN configuration
vlan port-based	V	Add new port based	switch(vlan)#vlan port-based
grpname		VALN	grpname test grpid 2 port 2-4
[Group Name]			or
grpid			switch(vlan)#vlan port-based
[GroupID]			grpname test grpid 2 port 2,3,4
port
[PortNumbers]
show vlan [GroupID]	V	Show VLAN	switch(vlan)#show vlan 23
or		information
show vlan
no vlan group	V	Delete port base	switch(vlan)#no vlan group 2
[GroupID]		group ID
Technical Support: 1-800-260-1312			International: 00-1-952-941-7600

28