Transition Networks SISGM1040-162D manual QOS Commands Set, AutoTrueFalse, Weighted-fairstrict

Transition Networks			SISGM1040-162D-LR
		into the forwarding
		state.
stp-path-priority	I	Use the spanning-tree	switch(config)#interface
[Port Priority]		port-priority interface	fastEthernet 2
		configuration	switch(config-if)#stp-path-priority
		command to configure	128
		a port priority that
		is used when two
		switches tie for
		position as the root
		switch.
stp-admin-p2p	I	Admin P2P of STP	switch(config)#interface
[AutoTrueFalse]		priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-p2p
			Auto
stp-admin-edge	I	Admin Edge of STP	switch(config)#interface
[TrueFalse]		priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-edge
			True
stp-admin-non-stp	I	Admin NonSTP of	switch(config)#interface
[TrueFalse]		STP priority on this	fastEthernet 2
		interface.	switch(config-if)#stp-admin-non-
			stp False
show spanning-tree	E	Displays a summary of	switch>show spanning-tree
		the spanning-tree
		states.
no spanning-tree	G	Disable spanning-tree.	switch(config)#no spanning-tree

QOS Commands Set

Command	Level	Description	Example
qos policy	G	Select QOS policy	switch(config)#qos policy
[weighted-fairstrict]		scheduling	weighted-fair
Technical Support: 1-800-260-1312			International: 00-1-952-941-7600

32