Transition Networks SISGM1040-162D manual Disable security of

Transition Networks			SISGM1040-162D-LR
no security	I	Disable security of	switch(config)#interface
		interface	fastEthernet 2
			switch(config-if)#no security
bandwidth type all	I	Set interface ingress	switch(config)#interface
		limit frame type to	fastEthernet 2
		‘accept all frame’	switch(config-if)#bandwidth type
			all
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-multicast-		limit frame type to	fastEthernet 2
flooded-unicast		‘accept broadcast,	switch(config-if)#bandwidth type
		multicast, and flooded	broadcast-multicast-flooded-
		unicast frame’	unicast
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-multicast		limit frame type to	fastEthernet 2
		‘accept broadcast and	switch(config-if)#bandwidth type
		multicast frame’	broadcast-multicast
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-only		limit frame type to	fastEthernet 2
		‘only accept broadcast	switch(config-if)#bandwidth type
		frame’	broadcast-only
bandwidth in	I	Set interface input	switch(config)#interface
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth in 100
		kbps to 102400 kbps
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
bandwidth out		Set interface output	switch(config)#interface
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth out
		kbps to 102400 kbps	100
Technical Support: 1-800-260-1312			International: 00-1-952-941-7600

25