Transition Networks SISGM1040-162D manual IP Configuration

Transition Networks SISGM1040-162D-LR

IP Configuration

User can configure the IP Settings and DHCP client function

￿DHCP Client: Enable or disable the DHCP client function. When DHCP client function is enabled, the industrial switch will be assigned an IP address from the network DHCP server. The default IP address will be replaced with an IP address which is assigned by the DHCP server. After user click “Apply” button, a pop-up dialog show up. It is to inform the user that when the DHCP client is enabled, the current IP will lose and user should find the new IP on the DHCP server.

￿IP Address: Assign the IP address that the network is using. If DHCP client function is enabled, then user needn’t assign the IP address manually. Instead, the network DHCP server will assign the IP address for the industrial switch and display it in this column. The default IP is 192.168.1.77

￿Subnet Mask: Assign the subnet mask of the IP address. If DHCP client function is enabled, and then user needn’t assign the subnet mask manually

￿Gateway: Assign the network gateway for the industrial switch. The default gateway is 192.168.1.254

￿DNS1: Assign the primary DNS IP address.

￿DNS2: Assign the secondary DNS IP address.

￿And then, click

Apply

IP configuration interface

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

49