Transition Networks SISGM1040-162D manual Sntp Commands Set, Link-UPLink, DownBoth, Smtp

Transition Networks			SISGM1040-162D-LR
[SystemlogSMTPBoth]
event ring-topology-	G	Set X-ring topology	switch(config)#event ring-
change		changed event type	topology-change both
[SystemlogSMTPBoth]
event systemlog	I	Set port event for	switch(config)#interface
[Link-UPLink-		system log	fastethernet 3
DownBoth]			switch(config-if)#event systemlog
			both
event smtp	I	Set port event for	switch(config)#interface
[Link-UPLink-		SMTP	fastethernet 3
DownBoth]			switch(config-if)#event smtp both
show event	P	Show event selection	switch#show event
no event device-cold-	G	Disable cold start	switch(config)#no event device-
start		event type	cold-start
no event authentication-	G	Disable Authentication	switch(config)#no event
failure		failure event type	authentication-failure
no event ring-topology-	G	Disable X-ring	switch(config)#no event ring-
change		topology changed	topology-change
		event type
no event systemlog	I	Disable port event for	switch(config)#interface
		system log	fastethernet 3
			switch(config-if)#no event
			systemlog
no event smtp	I	Disable port event for	switch(config)#interface
		SMTP	fastethernet 3
			switch(config-if)#no event smtp
show systemlog	P	Show system log	switch#show systemlog
		client & server
		information

SNTP Commands Set

Command

Level Description

Example

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

42