Transition Networks SISGM1040-162D manual Vlan configuration-Port-based Vlan, Click

Transition Networks SISGM1040-162D-LR

VLAN configuration—Port-based VLAN

Packets can go among only members of the same VLAN group. Note all unselected ports are treated as belonging to another single VLAN. If port-based VLAN is enabled, the VLAN-tagging is ignored.

In order for an end station to send packets to different VLAN groups, it itself has to be either capable of tagging packets it sends with VLAN tags, or it must be attached to a VLAN-aware bridge that is capable of classifying and tagging the packet with a different VLAN ID based on not only default PVID but also other information about the packet, such as the protocol.

VLAN – Port Based interface

￿Click

Add

to add a new VLAN group(The maximum VLAN group is up to 256

VLAN groups)

￿Entering the VLAN name, group ID and grouping the members of VLAN group

￿And then, click

Apply

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

77