Transition Networks

SISGM1040-162D-LR

QoS Configuration

You can configure Qos policy and priority setting, per port priority setting, COS and TOS setting.

QoS Policy and Priority Type

￿Qos Policy: select the Qos policy rule.

￿Using the 8,4,2,1 weight fair queue scheme: The switch will follow 8:4:2:1 rate to process priority queue from High to lowest queue. For example, when the system processes, 1 frame of the lowest queue, 2 frames of the low queue, 4 frames of the middle queue, and 8 frames of the high queue will be processed at the same time in accordance with the 8,4,2,1 policy rule.

￿Use the strict priority scheme: Always higher queue will be process first, except higher queue is empty.

￿Priority Type: there are 5 priority type selections available. Disable means no priority type is selected.

￿Port-base: the port priority will follow the Port-base that you have assigned – High, middle, low, or lowest.

￿COS only: the port priority will only follow the COS priority that you have assigned.

￿TOS only: the port priority will only follow the TOS priority that you have assigned.

￿COS first: the port priority will follow the COS priority first, and then other priority rule.

￿TOS first: the port priority will follow the TOS priority first, and the other priority rule.

￿Click

Apply .

Technical Support: 1-800-260-1312

International: 00-1-952-941-7600

92

Page 99
Image 99
Transition Networks SISGM1040-162D manual QoS Configuration, QoS Policy and Priority Type