Transition Networks |
IP Security
The IP security function allows the user to assign 10 specific IP addresses that have permission to access the switch through the web browser for managing the switch.
IP Security Mode: When this option is enabled, the Enable HTTP Server and Enable Telnet Server Check boxes will then be available.
Enable HTTP Server: When this check box is checked, the IP addresses among Security IP1 ~ IP10 will be allowed to access via HTTP service.
Enable Telnet Server: When checked, the IP addresses among Security IP1 ~ IP10 will be allowed to access via Telnet service.
Security IP 1 ~ 10: Assign up to 10 specific IP addresses. Only these 10 IP address can access and manage the switch through the Web browser
And then, click
Apply |
button to apply the configuration
[NOTE] Remember to execute the “Save Configuration” action, otherwise the new configuration will be lost when switch power is turned off.
Technical Support: | International: |
65
