Transition Networks SISGM1040-162D manual Spanning Tree Commands Set, ~61440, Seconds

Transition Networks			SISGM1040-162D-LR
[TaggedVID List]			switch(vlan)#vlan 8021q trunk 3
			hybrid-link untag 5 tag 6-8
show vlan [GroupID]	V	Show VLAN	switch(vlan)#show vlan 23
or		information
show vlan
no vlan group	V	Delete port base	switch(vlan)#no vlan group 2
[GroupID]		group ID

Spanning Tree Commands Set

Command	Level	Description	Example
spanning-tree enable	G	Enable spanning tree	switch(config)#spanning-tree
			enable
spanning-tree priority	G	Configure spanning	switch(config)#spanning-tree
[0~61440]		tree priority parameter	priority 32767
spanning-tree max-age	G	Use the spanning-tree	switch(config)#spanning-tree
[seconds]		max-age global	max-age 15
		configuration
		command to change
		the interval between
		messages the
		spanning tree receives
		from the root switch. If
		a switch does not
		receive a bridge
		protocol data unit
		(BPDU) message from
		the root switch within
		this interval, it
		recomputed the
		Spanning Tree
		Protocol (STP)
		topology.

Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

30