Cisco Systems 15216 EDFA2 Dwdm Lpout, Dwdm Ctmp, Example 9-25 RTRV-ALM-ALL Command and Response

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

SyntaxRTRV-ALM-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>],[<srveff>][,,,,,];

<sid> <date> <time>

M<ctag> COMPLD "<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"

;

Example 9-25 RTRV-ALM-ALL Command and Response

Amp01:ONS15216 EDFA2> RTRV-ALM-ALL:Amp01::229::MN,LCRNT1,NSA,,;

Amp01 2002-06-20 14:30:00

M 229 COMPLD

"1,DWDM:MJ,LOS,SA,6-20,14-25-30,,:\"Loss Of Signal\"" "EQPT,EQPT:MN,LCRNT1,NSA,6-20,14-25-30,,:\"Excessive Pump1 Current\""

;

Table 9-30 RTRV-ALM-ALL Syntax Description

Parameter	Syntax	Description
aid		Possible values are:
	1	Directly affecting the optical signal
	EQPT	General parameters of the ONS 15216 EDFA2 (not directly
		affecting optical signal or power bus)
conddescr		Detailed text description of the event. The conddescr is 1 to 64
		characters of ASCII text. See condtype below
condtype		Condition type identifies the type of alarm (maps to
(ccm)		cerent15216EdfaLogEventID). Possible condtype and
		corresponding conddescr (in quotes) are:
	LOS	“Loss of Signal” (input power) alarm
	(DWDM)	(cerent15216EdfaAlarmLpin).
	GAIN	“Gain Out of Range” alarm (cerent15216EdfaAlarmGain).
	(DWDM)
	LPOUT	“Loss of Output Power” alarm (cerent15216EdfaAlarmLpout).
	(DWDM)
	CTMP	“Case Temperature Out of Range” alarm
	(EQPT)	(cerent15216EdfaAlarmCtmp).
	LCRNT1	“Excessive Pump1 Current” alarm
	(EQPT)	(cerent15216EdfaAlarmLcrnt1).
	LCRNT2	“Excessive Pump2 Current” alarm
	(EQPT)	(cerent15216EdfaAlarmLcrnt2).
	LTMP1	“Excessive Pump1 Temperature” alarm
	(EQPT)	(cerent15216EdfaAlarmLtmp1).
	LTMP2	“Excessive Pump2 Temperature” alarm
	(EQPT)	(cerent15216EdfaAlarmLtmp2).
date	yyyy-mm-dd	Date of origination of TL1 message.

Cisco ONS 15216 EDFA2 Operations Guide

9-34 78-16033-01