FINAL DRAFT - CISCO CONFIDENTIAL
6-15
CiscoONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter6 ASH Commands
SNMP Commands
6.6 SNMP Commands
The SNMP commands are useful in working with the SNMP protocol to provision and configure the
ONS 15216 EDFA2. When issuing these SNMP commands, the command s yntax requires that the
command must be followed by either the ONS 15216 EDFA2 IP address or the word “local”.
SNMP commands are listed as follows:
•snmp attribute get Command, page 6-15
•snmp attribute list Command, page 6-16
•snmp attribute set Command, page 6-17
•snmp mib display Command, page 6-17
•snmp mib get Command, page 6-18
•snmp mib list Command, page 6-18
•snmp row display Command, page 6-19
•snmp row get Command, page 6-20
•snmp row set Command, page 6-20
•snmp subtree display Command, page 6-21
•snmp subtree get Command, page 6-21
•snmp subtree list Command, page 6-22
•snmp table display Command, page 6-23
•snmp table get Command, page 6-24
•snmp table list Command, page 6-24
•snmp tree attribute list Command, page 6-25

6.6.1 snmp attribute get Command

Command snmp attribute get
Syntax Description snmp attribute get {IP_address | local} attribute_name index
Accesses and displays a specific MIB attribute. See Example6-13.
Example6-13 snmp attribute get Command
ash:hostname:ONS15216 EDFA2> snmp attribute get local sysDescr
attributes
sysDescr "hostname, Hardware Rev B0, ONS15216 EDFA2, v2.1.9,
Serial No DIT05470008, MAC Addr 00059a383d11"
Type the command, the first few letters of the attribute, and press Tab to view a list of attributes that can
be set. See Example 6-14.