FINAL DRAFT - CISCO CONFIDENTIAL
9-47
CiscoONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.32 RTRV-DFLT-SECU
Command RTRV-DFLT-SECU
Retrieves the timeout value(s) for user access level(s).
Syntax RTRV-DFLT-SECU:[<tid>]:<aid>:<ctag>;
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:AL=<al>,TMOUT=<timeout>"
;
Example9-34 RTRV-DFLT-SECU Command and Response
Amp01:ONS15216 EDFA2> RTRV-DFLT-SECU:Amp01:ALL:123;
Amp01 2002-01-12 08:01:05
M 123 COMPLD
"EQPT:AL=R,TMOUT=60"
"EQPT:AL=RW,TMOUT=30"
"EQPT:AL=RWA,TMOUT=15"
;
ntfncde Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
CR Critical alarm.
MJ Major alarm.
MN Minor alarm.
NA N o alarm.
ocrdat m-d Date (month-day) of the event occurrence (derived from
cerent15216EdfaDateAndTimeString).
ocrtm h -m-s Time (hour-minute-second) of the event occurrence (derived
from cerent15216EdfaDateAndTimeString).
sid string Source identifier uniquely identifies the source of a TL1
autonomous command.
srveff Effect on service. Possible values are:
SA Service affecting.
NSA Non-service affecting.
time hh:mm:ss Time of origination of TL1 message.
Table9-38 RTRV-COND-EQPT Syntax Description (continued)
Parameter Syntax Description