Cisco Systems 15216 EDFA2 manual Rtrv-User-Secu, Set-Attr-Secudflt, CommandRTRV-USER-SECU

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7.43 RTRV-USER-SECU

CommandRTRV-USER-SECU

Retrieves the access level of an existing user from the system. Does not return the password.

SyntaxRTRV-USER-SECU:[<tid>]:<uid>:<ctag>;

<sid> <date> <time>

M<ctag> COMPLD "<uid>,<al>"

;

Example 9-46 RTRV-USER-SECU Command and Response

Amp01:ONS15216 EDFA2> RTRV-USER-SECU:Amp01:jsmith:123;

Amp01 2002-05-13 17:23:16

M 123 COMPLD "jsmith,RW"

;

Table 9-50 RTRV-USER-SECU Syntax Description

Parameter	Syntax	Description
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
al		Access level of the user. See “Summary of Security Permissions
		for TL1 Commands” section on page 9-6for access level
		permissions.
	R	Read only privileges.
	RW	Read and write privileges.
	RWA	Read, write, and administrative privileges.
uid	string	User identifier (user name) of the existing user. If no user
		identifier is specified and the current user has RWA access
		level, it will list all existing users and their security levels.

9.7.44 SET-ATTR-SECUDFLT

CommandSET-ATTR-SECUDFLT

Sets the timeout value of user sessions for users with a specific access level. If no communication occurs for this time, the user session is closed by the ONS 15216 EDFA2 TL1 agent. Users affected by changes to the timeout must log out and log in again for the change to take effect.

SyntaxSET-ATTR-SECUDFLT:[<tid>]::<ctag>::AL=<al>,TMOUT=<timeout>[,][,][,][,][,];

Cisco ONS 15216 EDFA2 Operations Guide

9-60 78-16033-01