Cisco Systems 15216 EDFA2 manual Ed-User-Secu, Ent-User-Secu, CommandED-USER-SECU, Rwa

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7.14 ED-USER-SECU

CommandED-USER-SECU

Edits the user identifier, password and access level of an existing user. Per TR-835, only those data parameters that are to be edited are entered while those that are unaffected are omitted. If any position-defined parameter is omitted, a comma is to be used as the delimiter.

SyntaxED-USER-SECU:[<tid>]:<uid>:<ctag>::<newuid>,<pid>,,<al>[:];

Example 9-16 ED-USER-SECU Command

Amp01:ONS15216 EDFA2> ED-USER-SECU:Amp01:jsmith:123::johnsmith,****,,RW;

Table 9-21 ED-USER-SECU Syntax Description

Parameter	Syntax	Description
uid	string	The user identifier (user name) of the existing user whose
		parameters are being modified.
newuid	string	New user identifier (user name) for the existing user. Can be
		any combination of up to 10 alphanumeric characters.
pid	string	The user’s new private identifier (password). Must be a string
		of up to 10 characters, where at least 2 are non-alphabetic
		characters and at least 1 is a special character. Special characters
		are +, #, and %. (defined in Telcordia GR-831-CORE).
al		New access level of the user. See “Summary of Security
		Permissions for TL1 Commands” section on page 9-6for
		access level permissions.
	R	Read only privileges.
	RW	Read and write privileges.
	RWA	Read, write, and administrative privileges.

9.7.15 ENT-USER-SECU

CommandENT-USER-SECU

Creates a new user in the system; specifies the user identifier, password and access level of the new user.

SyntaxENT-USER-SECU:[<tid>]:<uid>:<ctag>::<pid>,,<al>[:];

Example 9-17 ENT-USER-SECU Command

Amp01:ONS15216 EDFA2> ENT-USER-SECU:Amp01:jsmith:123::****,,RW;

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-21