Cisco Systems 15216 EDFA2 manual Setup for CTM Access

Chapter 5 SNMP MIB Installation and Configuration

Setup for CTM Access

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

5.3 Setup for CTM Access

Use the following procedure to configure a new ONS 15216 EDFA2 for Cisco Transport Manager (CTM) access:

Step 1 Log into the serial port. Use 19,000 bps, 8 bits, no parity, 1 stop, and no flow control over a male-to-female straight 9-pin cable.

Amp01:ONS15216 EDFA2> ACT-USER::CISCO15:123::;

Step 2	Set the default user password to admin15##:
	Amp01:ONS15216 EDFA2> ED-PID::CISCO15:124::,admin15##;
Step 3	Enter the IP address and node name configuration information:
	Amp01:ONS15216 EDFA2> ED-NE-GEN:::125:::NAME=			, IPADDR=	, IPMASK=	, DEFRTR=	;
Step 4	Set the date and time:
	Amp01:ONS15216 EDFA2> ED-DAT:::126::2003-06-18,08-49-00;
Step 5	Activate the new IP address by rebooting:
	Amp01:ONS15216 EDFA2> INIT-SYS::ALL:127::1;
Step 6	Telnet to the ASH shell by typing the following:
	telnet <ONS 15216 EDFA2 IP address> 8023
Step 7	Login using the user name CISCO15 and the password admin15##.
Step 8	Enter the community information:
	ash:hostname:ONS15216 EDFA2> snmp row set local cerent15216EdfaCommunityEntry 2 (Do not
	use Entry 1 which is the RO public community)
	cerent15216EdfaCommIndex = 2	(if the CommunityEntry is 2)
	cerent15216EdfaCommName = "private"		(must match the CTM community string entry)
	cerent15216EdfaCommViewIndex = 1
	cerent15216EdfaCommPrivileges = 255
	cerent15216EdfaCommSrcIPAddr = 0.0.0.0		(for more security, enter CTM A's IP address)
	cerent15216EdfaCommNetMask = 255.255.255.255
	cerent15216EdfaCommStatus = 4
	(active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6))
	ash:hostname:ONS15216 EDFA2> snmp row set local cerent15216EdfaCommunityEntry 3
	cerent15216EdfaCommIndex = 3	(if the CommunityEntry is 3)
	cerent15216EdfaCommName = "private"		(must match the CTM community string entry)
	cerent15216EdfaCommViewIndex = 1
	cerent15216EdfaCommPrivileges = 255
	cerent15216EdfaCommSrcIPAddr = 0.0.0.0		(for more security, enter CTM B's IP address)

cerent15216EdfaCommNetMask = 255.255.255.255 cerent15216EdfaCommStatus = 4 (active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6))

Step 9 Verify the community information:

ash:hostname:ONS15216 EDFA2> snmp table display local cerent15216EdfaCommunityEntry

Step 10 Enter the trap destination information:

ash:hostname:ONS15216 EDFA2> snmp row set local cerent15216EdfaCommTrapEntry 1

Cisco ONS 15216 EDFA2 Operations Guide

5-10 78-16033-01