Cisco Systems 15216 EDFA2 manual Rack Installation and Power Supply Connection Procedures

Contents

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

		3.2		Standard Precautions				3-1
		3.3		Placement and Power Connection						3-1
				3.3.1	General Rack Considerations						3-1
				3.3.2	Rack Installation and Power Supply Connection Procedures 3-2
		3.4		SC/UPC Optical Ports				3-3
				3.4.1	Safety Requirements				3-3
				3.4.2	Optical Connection Procedure						3-3
				3.4.3	Optical Amplification Operation Verification Procedure 3-4
		3.5		Communications			3-5
				3.5.1	Alarm Out Relay Interface (RJ-45)							3-5
				3.5.2 Alarm LEDs 3-6
				3.5.3	Serial Interface (EIA/TIA-232) Communication 3-7
				3.5.4 Serial Interface Remote Communication via Modem									3-11
				3.5.5	LAN Interface (Ethernet)					3-14
			Provisioning Using ASH and SNMP
C H A P T E R 4										4-1
		4.1		Log In via RS-232(EIA/TIA-232) Port Using HyperTerminal									4-1
		4.2		Set IP Address			4-3
		4.3		Log In via LAN Port Using Telnet (Optional) 4-3
		4.4		Set Date and Time				4-4
		4.5		Set Power Bus Mode (Simplex or Duplex)								4-4
		4.6		Verify Amplifier Operational Status							4-4
		4.7		Set Gain		4-5
		4.8		Set Alarm Thresholds				4-5
		4.9		Set Password			4-10
			4.10 Add Users			4-11
			4.11 Save Changes				4-11
		4.12		Log Off		4-12
		4.13		Back Up System Configuration						4-12
		4.14		Restore System Configuration						4-13
		4.15		Recover Default Password					4-14
			SNMP MIB Installation and Configuration
C H A P T E R 5											5-1
		5.1		SNMP Overview			5-1
				5.1.1 SNMP Components					5-1
				5.1.2 ONS 15216 EDFA2 SNMP Elements								5-2
				5.1.3 SNMP MIBs and Message Types								5-3
		Cisco ONS 15216 EDFA2 Operations Guide
	iv												78-16033-01