FINAL DRAFT - CISCO CONFIDENTIAL
6-24
CiscoONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter6 ASH Commands
SNMP Commands
sysLocation = "";
sysServices = 0;
sysORLastChange = 120;
};
6.6.14 snmp table get Command
Command snmp table get
Syntax Description snmp table get {IP_address | local} table
Accesses table data. See Example 6-26.
Example6-26 snmp table get Command
ash:hostname:ONS15216 EDFA2> snmp table get local system
attributes
sysDescr "hostname, Hardware Rev A1, ONS15216 EDFA2,
v2.3.0, Serial No DIT0533000P, MAC Addr 00059a383d10"
sysObjectID cerent15216EdfaNode
sysUpTime 1330310
sysContact "username"
sysName "sysname"
sysLocation "Lab"
sysServices 0
sysORLastChange 125
6.6.15 snmp table list Command
Command snmp table list
Syntax Description snmp table list {IP_address | local} table
Lists all the data within a table. Example6-27 below displays the command for the UDP (User Datagram
Protocol) table. This command displays data by attribute.
Example6-27 snmp table list Command
ash:hostname:ONS15216 EDFA2> snmp table list local udp
udpInDatagrams.0 = 11341;
udpNoPorts.0 = 135;
udpInErrors.0 = 1983;
udpOutDatagrams.0 = 9233;
udpLocalAddress.172.22.82.19.161 = 172.22.82.19;
udpLocalPort.172.22.82.19.161 = 161;