Cisco Systems 15216 EDFA2 manual Pwr-A, RTRV-COND-ENV Syntax Description

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-37 RTRV-COND-ENV Syntax Description

Parameter	Syntax	Description
aid		Specifying PWR-A or PWR-B in input has a filter effect on the
		response.
	PWR-A	Affecting Power Bus A (or both A and B).
	PWR-B	Affecting Power Bus B.
	ALL	Any or all of the preceding (command input only).
conddescr		Detailed text description of the event. The conddescr is 1 to 64
		characters of ASCII text. See condtype below.
condtype		Condition type identifies the type of alarm (maps to
		cerent15216EdfaLogEventID). Possible condtype and
		corresponding conddescr (in quotes) are:
	PWRBUSA	“Power Bus A (voltage) Alarm”
		(cerent15216EdfaAlarmPowerBusA).
	PWRBUSB	“Power Bus B (voltage) Alarm”
		(cerent15216EdfaAlarmPowerBusB).
date	yyyy-mm-dd	Date of origination of TL1 message.
ntfncde		Notification code (maps to cerent15216EdfaAlarmPriority).
		Possible values are:
	CR	Critical alarm.
	MJ	Major alarm.
	MN	Minor alarm.
	NA	No alarm.
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence (derived
		from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
srveff		Effect on service. Possible values are:
	SA	Service affecting.
	NSA	Non-service affecting.
time	hh:mm:ss	Time of origination of TL1 message.

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-45