Cisco Systems 15216 EDFA2 manual Rtrv-Env, Overallgain, CommandRTRV-ENV

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-40 RTRV-DWDM Syntax Description (continued)

Parameter	Syntax	Description
gain	130 - 220	Value of gain setpoint in units of 10 dB when mode is
		GAINTEMP (gets
		cerent15216EdfaConstGainOverallGainMeasured). Same as
		OVERALLGAIN.
preattmeasured	0 - 110	Gain pre-attenuation value in units of 10 dB (gets
		cerent15216EdfaVariableGainPreAttenuationMeasured).

9.7.34 RTRV-ENV

CommandRTRV-ENV

Retrieves the ONS 15216 EDFA2 environmental parameter configuration.

SyntaxRTRV-ENV:[<tid>]:<aid>:<ctag>; <sid> <date> <time>

M <ctag> COMPLD

"<aid>:PWRBUSMODE=<pwrbusmode>"

;

Example 9-36 RTRV-ENV Command and Response

Amp01:ONS15216 EDFA2> RTRV-ENV:Amp01:ALL:123;

Amp01 2002-06-20 14:30:00

M123 COMPLD "PWR-B:PWRBUSMODE=DUPLEX"

;

Table 9-41 RTRV-ENV Syntax Description

		Parameter	Syntax	Description
		date	yyyy-mm-dd	Date of origination of TL1 message.
		time	hh:mm:ss	Time of origination of TL1 message.
		aid		PWR-A, PWR-B, and ALL have same input effect.
			PWR-A	Affecting Power Bus A (or both A and B).
			PWR-B	Affecting Power Bus B.
			ALL	Any or all of the preceding (command input only).
		pwrbusmode		Power bus mode setting (cerent15216EdfaPowerBusMode).
				Possible values are:
			SIMPLEX	Simplex mode. Requires power only to bus A
				(cerent15216EdfaPowerBusMode set to simplex).
			DUPLEX	Duplex mode (manufacturer default). Requires power to both
				bus A and bus B (cerent15216EdfaPowerBusMode set to
				duplex).
	Cisco ONS 15216 EDFA2 Operations Guide
9-50				78-16033-01