Cisco Systems 15216 EDFA2 manual Los

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-23 INH-MSG-ALL Syntax Description (continued)

Parameter	Syntax	Description
condtype		Condition type of the alarm or event that is to be
		inhibited (maps to cerent15216EdfaLogEventID). ALL
		maps to all types. A null maps to none of the types, i.e.,
		with a null, all existing condtype allowances are kept
		unchanged. Possible condtype and corresponding
		conddescr (in quotes) are:
	LOS	“Loss of Signal” (input power) alarm
		(cerent15216EdfaAlarmLpin).
	GAIN	“Gain Out of Range” alarm
		(cerent15216EdfaAlarmGain).
	LPOUT	“Loss of Output Power” alarm
		(cerent15216EdfaAlarmLpout).
	CTMP	“Case Temperature Out of Range” alarm
		(cerent15216EdfaAlarmCtmp).
	LCRNT1	“Excessive Pump1 Current” alarm
		(cerent15216EdfaAlarmLcrnt1).
	LCRNT2	“Excessive Pump2 Current” alarm
		(cerent15216EdfaAlarmLcrnt2).
	LTMP1	“Excessive Pump1 Temperature” alarm
		(cerent15216EdfaAlarmLtmp1).
	LTMP2	“Excessive Pump2 Temperature” alarm
		(cerent15216EdfaAlarmLtmp2).
	POWERBUSA	“Power Bus A (voltage) Alarm”
		(cerent15216EdfaAlarmPowerBusA).
	POWERBUSB	“Power Bus B (voltage) Alarm”
		(cerent15216EdfaAlarmPowerBusB).
	CTRLMODE1	“Pump1 Control Mode Changed”
		(cerent15216EdfaControlMode for
		cerent15216EdfaPumpCfgPumpNumber=1).
	CTRLMODE2	“Pump2 Control Mode Changed”
		(cerent15216EdfaControlMode for
		cerent15216EdfaPumpCfgPumpNumber=2).

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-23