Cisco Systems 15216 EDFA2 manual Rept EVT Fxfr, Eqpt Softwarereset

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-28 REPT EVT DWDM / REPT EVT ENV / REPT EVT EQPT Syntax Description (continued)

Parameter	Syntax	Description
condtype	MAXCTMPHYSTCHGD	“Max Ctmp (case temperature) Hysteresis Changed”
(ccm)	(EQPT)	(cerent15216EdfaCtmpMaxHysteresis).
	MINCTMPCHGD	“Min Case Temperature Changed”
	(EQPT)	(cerent15216EdfaCtmpMin).
	MINCTMPHYSTCHGD	“Min Ctmp (case temperature) Hysteresis Changed”
	(EQPT)	(cerent15216EdfaCtmpMinHysteresis).
	CUTOVERRESET	(Software) “Reset after Cutover”
	(EQPT)	(cerent15216EdfaOpCutover).
	SOFTWARELOAD	(New) “Software Load” (cerent15216EdfaOpLoad).
	(EQPT)
	SOFTWARERESET	“Software Reset” (cerent15216EdfaOpReset).
	(EQPT)
condeff	string	Effect of the condition. Always TC (transient condition).
	TC
date	yyyy-mm-dd	Date of origination of TL1 message.
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence
		(derived from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
srveff		Effect on service. Possible values are:
	SA	Service affecting.
	NSA	Non-service affecting.
time	hh:mm:ss	Time of origination of TL1 message.

9.7.22 REPT EVT FXFR

Command REPT EVT FXFR

Reports autonomous events related to the FTP file transfer (see “COPY-RFILE” section on page 9-12). Reports when an event related to the file transfer is logged.

Syntax		<sid> <date> <time>
	A	<atag> REPT EVT FXFR
		"<aid>:<filename>,<fxfr_status>[,<fxfr_rslt>][,<bytes_xfrd>]"
	;

Cisco ONS 15216 EDFA2 Operations Guide

9-32 78-16033-01