Cisco Systems 15216 EDFA2 manual Flash File System Commands, Ffs file list Command

Chapter 6 ASH Commands

Flash File System Commands

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Syntax Description shell type modify {tl1 ash}

Sets the shell type to TL1 or ASH for the ONS 15216 EDFA2’s RS-232 (EIA/TIA-232) port (accessed via HyperTerminal) and the default TCP/IP port on the ONS 15216 EDFA2’s LAN port (accessed via Telnet). The default is TL1. This command requires a system reboot using the processor reset command for changes to take effect.

To return to the ASH shell from the TL1 shell, use the command ED-NE-GEN.(See Step 3. in “Log In via LAN Port Using Telnet (Optional), page 4-3” section on page 4-1.)

6.5 Flash File System Commands

The flash file system (FFS) file commands allow the user to manage the number of files that are on the ONS 15216 EDFA2 Flash memory. Never erase the following files:

•Two current versions of software (15216EdfaSw_x.x.x)

•snmp.cfg

Because the snmp.cfg file contains important SNMP attributes, deleting this file would mean that the community and view tables would have to be reset before a remote user could access the

ONS 15216 EDFA2 via SNMP.

EDFA software image files are named using a special naming convention. Do not change the file name when image files are downloaded from an FTP server onto the box in the field when using the FTP command shell of the ONS 15216 EDFA2.

6.5.1 ffs file list Command

Command	ffs file list
	ffs file list
Syntax Description
	List the files on the ONS 15216 EDFA2 Flash memory. See Example 6-12.
	Example 6-12 ffs file list Command
	ash:hostname:ONS15216 EDFA2> ffs file list

--------name--------	type status		length	rename_bam attributes
15216EdfaSw_2.3.0	1	fffc	xxxxxxx	ffffffff	ffffffff
snmp.bak	1	fffc	1709	00140001	ffffffff
passwd	2	fffc	-1	ffffffff	ffffffff
snmp.cfg	1	fffc	1709	ffffffff	ffffffff
15216EdfaSw_2.1.0	1	fffc	1681923	ffffffff	ffffffff

Cisco ONS 15216 EDFA2 Operations Guide

6-14 78-16033-01