Cisco Systems 15216 EDFA2 manual Ed-Ne-Gen, CommandED-NE-GEN

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-18 ED-ENV Syntax Description (continued)

Parameter	Syntax	Description
pwrbusmode		Power bus mode. Possible values are:
	SIMPLEX	Simplex mode. Requires power only to bus A. Sets
		cerent15216EdfaPowerBusMode to simplex.
	DUPLEX	Duplex mode (default). Requires power to both bus A and bus
		B. Sets cerent15216EdfaPowerBusMode to duplex.

9.7.12 ED-NE-GEN

CommandED-NE-GEN

Edit general parameters of the ONS 15216 EDFA2. Edits ONS 15216 EDFA2’s sid (source identifier)/tid (target identifier), IP address, IP mask, and IP address of the default router. The

ONS 15216 EDFA2 needs to be manually rebooted for the changes to take effect. (Use the INIT-SYScommand to manually reboot after changing parameters.) Also edits the boot table content: to return to the TL1 shell from the ASH shell, use the ASH command shell type modify tl1 (step 3. in “Log In via RS-232(EIA/TIA-232) Port Using HyperTerminal” section on page 8-1).

SyntaxED-NE-GEN:[<tid>]::<ctag>:::[NAME=<name>],[IPADDR=<ipaddr>],[IPMASK=<ipmask>],[DEFRTR=<def rtr>],[BOOTRECORDTYPE1=<bootrectype1>],[BOOTFILENAME1=<bootfilename1>],[BOOTIPADDR1=<booti

paddr1>],[BOOTRECORDTYPE2=<bootrectype2>],[BOOTFILENAME2=<bootfilename2>],[BOOTIPADDR2=<bo

otipaddr2>],[CLI=<cli>];

Example 9-14 ED-NE-GEN Command

Amp01:ONS15216 EDFA2> ED-NE-GEN:Amp01::123:::NAME=Amp01,IPADDR=192.167.3.4,IPMASK=255.255.

255.0,DEFRTR=192.167.3.20,BOOTRECORDTYPE2=TFTP,BOOTFILENAME2=15216EdfaSw_1.4.0,BOOTIPADDR2

=192.168.3.4,CLI=ASH;

Table 9-19 ED-NE-GEN Syntax Description

	Parameter	Syntax	Description
	name	string	System’s sid/tid name (sysName).
	ipaddr	string	IP address of the system
			(cerent15216EdfaSromIpMgmtEnetAddress).
	ipmask	string	Subnet mask of the system
			(cerent15216EdfaSromIpMgmtEnetSubNetMask).
	defrtr	string	IP address of the default router
			(cerent15216EdfaSromIpMgmtDefaultRouterAddress).
	bootrectype1		Boot record type (cerent15216EdfaBootType for first entry).
			Possible values are:
		FLASH	Boot from flash.
		TFTP	Boot through TFTP.
			Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01				9-19