Chapter 6 ASH Commands

Restore Commands

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

cerent15216EdfaCommTrapIndex = 1; cerent15216EdfaCommTrapCommunity = "private"; cerent15216EdfaCommTrapDestIPAddress = 172.22.87.50; cerent15216EdfaCommTrapDestUDPPort = 162; cerent15216EdfaCommTrapViewIndex = 1; cerent15216EdfaCommTrapVersion = v2; cerent15216EdfaCommTrapStatus = active;

};

CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaCommTrapEntry ::=

{

cerent15216EdfaCommTrapIndex = 2; cerent15216EdfaCommTrapCommunity = "private"; cerent15216EdfaCommTrapDestIPAddress = 172.22.87.254; cerent15216EdfaCommTrapDestUDPPort = 162; cerent15216EdfaCommTrapViewIndex = 1; cerent15216EdfaCommTrapVersion = v2; cerent15216EdfaCommTrapStatus = active;

};

6.9 Restore Commands

6.9.1 backup system Command

Command

backup system

Syntax Description backup system filename

Creates a backup file on the FFS with the configuration information of the ONS 15216 EDFA2. This file contains manufacturing information about the unit that is being backed up (such as part number and serial number), setup information for the unit (such as IP address and host name), all configuration information (such as alarm thresholds and pump mode), and the user database.

6.9.2 restore system Command

Command

restore system

Syntax Description restore system filename

Restores the configuration information from a backup file on the FFS to the ONS 15216 EDFA2. During this process, all configuration information (such as alarm thresholds and pump mode) and the user database from the file are replaced in the ONS 15216 EDFA2 memory and FFS. Before the restore begins, a cyclic redundancy code (CRC) check is performed to ensure data integrity.

Cisco ONS 15216 EDFA2 Operations Guide

 

78-16033-01

6-31

 

 

 

Page 131
Image 131
Cisco Systems 15216 EDFA2 manual Restore Commands, Backup system Command, Restore system Command