Cisco Systems 15216 EDFA2 Rtrv-Alm-Eqpt, CommandRTRV-ALM-EQPT, RTRV-ALM-EQPT Syntax Description

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-32 RTRV-ALM-ENV Syntax Description (continued)

Parameter	Syntax	Description
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence (derived
		from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
time	hh:mm:ss	Time of origination of TL1 message.

9.7.26 RTRV-ALM-EQPT

CommandRTRV-ALM-EQPT

Generates a report on all active alarms (except environmental alarms as per Telcordia GR-833-CORE).

SyntaxRTRV-ALM-EQPT:[<tid>]:<aid>:<ctag>::[<ntfcncde>],[<condtype>],[<srveff>][,,,,,]; <sid> <date> <time>

M<ctag> COMPLD "<aid>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"

;

Example 9-28 RTRV-ALM-EQPT Command and Response

Amp01:ONS15216 EDFA2> RTRV-ALM-EQPT:Amp01:ALL:229::MN,LCRNT1,NSA,,;

Amp01 2002-06-20 14:30:00

M229 COMPLD "EQPT:MN,LCRNT1,NSA,6-20,14-25-30,,:\"Excessive Pump1 Current\""

;

Table 9-33 RTRV-ALM-EQPT Syntax Description

Parameter	Syntax	Description
aid		EQPT and ALL have same input effect.
	EQPT	General parameters of the ONS 15216 EDFA2 (not directly
		affecting optical signal or power bus).
	ALL	Any or all of the preceding (command input only).
conddescr		Detailed text description of the event. The conddescr is 1 to 64
		characters of ASCII text. See condtype below.

Cisco ONS 15216 EDFA2 Operations Guide

9-38 78-16033-01