Cisco Systems 15216 EDFA2 Rtrv-Alm-Env, CommandRTRV-ALM-ENV, RTRV-ALM-ENV Syntax Description

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7.25 RTRV-ALM-ENV

CommandRTRV-ALM-ENV

Generates a report on specific or all active environmental (power bus) alarms.

SyntaxRTRV-ALM-ENV:[<tid>]:<aid>:<ctag>::[<ntfcncde>],[<condtype>];

<sid> <date> <time>

M<ctag> COMPLD "<aid>,<ccm>:<ntfcncde>,<condtype>,<ocrdat>,<ocrtm>,<conddescr>"

;

Example 9-27 RTRV-ALM-ENV Command and Response

Amp01:ONS15216 EDFA2> RTRV-ALM-ENV:Amp01:ALL:229::MN,PWRBUSA;

Amp01 2002-06-20 14:30:00

M 229 COMPLD

"PWR-A,ENV:MN,PWRBUSA,6-20,14-25-30,\"Power Bus A Alarm\""

;

Table 9-32 RTRV-ALM-ENV Syntax Description

	Parameter	Syntax	Description
	aid		Specifying PWR-A or PWR-B in input has a filter effect on the
			response.
		PWR-A	Affecting Power Bus A (or both A and B).
		PWR-B	Affecting Power Bus B.
		ALL	Any or all of the preceding (command input only).
	conddescr		Detailed text description of the event. The conddescr is 1 to 64
			characters of ASCII text. See condtype below.
	condtype		Condition type identifies the type of alarm (maps to
			cerent15216EdfaLogEventID). Possible condtype and
			corresponding conddescr (in quotes) are:
		PWRBUSA	“Power Bus A (voltage) Alarm”
			(cerent15216EdfaAlarmPowerBusA).
		PWRBUSB	“Power Bus B (voltage) Alarm”
			(cerent15216EdfaAlarmPowerBusB).
	date	yyyy-mm-dd	Date of origination of TL1 message.
	ntfncde		Notification code (maps to cerent15216EdfaAlarmPriority).
			Possible values are:
		CR	Critical alarm.
		MJ	Major alarm.
		MN	Minor alarm.
		CL	Cleared alarm.
		NA	No alarm.
			Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01				9-37