HP 625n Gigabit Ethernet Print Server manual Telnet Commands and Parameters 9

Table 3.4 Telnet Commands and Parameters (9 of 18)

slp-config	Enables or disables the Service Location Protocol (SLP)
	operation on the print server: 0 disables, 1 (default) enables.
	SLP is used by selected HP software applications (through
	UDP port 427) to automate device discovery.
slp-keep-alive	Specifies a time period for the print server to send multicast
	packets on the network to prevent being deleted from
	network device tables. Some infrastructure devices, such as
	switches, may delete active devices from their device tables
	due to inactivity on the network. To enable this feature, set
	a value from 1 to 1440 minutes. Set 0 to disable this feature.
mdns-config	Enables or disables Multicast Domain Name System
	(mDNS) services. 0 disables, 1 (default) enables. mDNS is
	typically used on small networks for IP address and name
	resolution (through UDP port 5353) where a conventional
	DNS server is not available.
mdns-service-name	Specifies an alphanumeric string of up to 64 ASCII
	characters assigned to this device or service. This name is
	persistent and is used to resolve a particular device or
	service if socket information (such as the IP address)
	changes from session to session. Apple Rendezvous will
	display this service. The default service name is the printer
	model and the LAN Hardware (MAC) address.
mDNS Domain	(Read-only parameter) Specifies the mDNS domain name
Name	assigned to the device, in the form <host name>.local. If a
	user-specified host name has not been assigned, the default
	host name NPIxxxxxx is used, where xxxxxx are the last 6
	digits of the LAN hardware (MAC) address.
mdns-pri-svc	Specifies the mDNS highest priority service to use for
	printing.To set this parameter, choose one of the following
	printing option numbers:
	1: Port 9100 printing
	2: IPP port printing
	3: The default LPD raw queue
	4: The default LPD text queue
	5: The default LPD auto queue
	6: The default LPD binps (binary postscript) queue
	7 through 12: If user-specified LPD queues are defined,
	corresponds to user-specified LPD queues 5 through 10.
	The default selection will depend on the printer, typically port
	9100 printing or LPD binps.
ttl-slp	Specifies the IP multicast “Time To Live” (TTL) setting for
	Service Location Protocol (SLP) packets. The default value
	is 4 hops (the number of routers from the local network).
	The range is 1-15. When set to a -1, multicast capability
	is disabled.

ENWW TCP/IP Configuration 87