The syslog server may not receive all syslog events from the HP Jetdirect print server:

UDP does not guarantee delivery of messages.

The HP Jetdirect print server attempts to eliminate duplicate messages (to minimize unnecessary network traffic).

The volume of messages sent by the HP Jetdirect print server is configurable.

Methods to configure HP Jetdirect syslog parameters include BOOTP, DHCP, Telnet, the embedded Web server, and management software. For selected printers, an EIO menu accessed through the printer control panel provides limited syslog configuration. The syslog configuration command or parameter entries may vary depending on the method used. For more information, see the applicable sections in this guide.

Selected syslog parameters on the HP Jetdirect print server are listed in Table A.4.

Table A.4 HP Jetdirect Syslog Parameters

Item

Description

 

 

Syslog Server

IP address of a syslog server for sending syslog messages. If

IP address

zero (0.0.0.0) or not specified, syslog messages are disabled.

 

 

Syslog Maximum

The number of syslog messages that can be sent by the

Messages

HP Jetdirect print server on a per-minute basis, from 0 to 1000.

 

This parameter helps to control the syslog file size. The default

 

is 10 messages per minute. If 0, the number of syslog messages

 

is not restricted.

 

 

Syslog Priority

A method for filtering syslog messages that are sent to the

 

syslog server. The range is 0 through 8, with 0 the most specific

 

and 8 the most general. Only messages that are lower than the

 

specified filter level (or higher in priority) are reported. The

 

default is 8, messages of all priorities are sent. If 0, all syslog

 

messages are disabled.

 

 

Syslog Facility

A code used to identify the source facility of a message (for

 

example, to identify the source of selected messages during

 

troubleshooting). By default, the HP Jetdirect print server uses

 

LPR as the source facility code, but local user values of local0

 

through local7 can be used to isolate individual or groups of print

 

servers.

 

 

ENWW

TCP/IP Overview 243

Page 243
Image 243
HP 625n Gigabit Ethernet Print Server manual Table A.4 HP Jetdirect Syslog Parameters, Syslog Server, Is not restricted