HP 625n Gigabit Ethernet Print Server Microsoft Supplied Software, HP Software Supported Proxies

2.To install the software and set up the print path to the printer, follow the instructions provided with the software. Contact your network administrator to get the IP address or URL of the printer to complete the setup.

HP Software System Requirements

●Computer running Microsoft Windows NT 4.0 (Intel-based) or Windows 2000

●IPP-enabled HP Jetdirect print server (such as HP Jetdirect 620n or en3700)

HP Software Supported Proxies

Web proxy with support for HTTP v1.1 or greater (may not be needed if printing over an intranet).

Microsoft Supplied Software

Note	Contact Microsoft for support of Windows IPP
	software.

Windows 2000/XP/Server 2003 Integrated Software

On Windows 2000/XP/Server 2003 systems, an alternative to using the HP supplied software is to use the IPP-client software integrated with the Windows system. The IPP implementation on the HP Jetdirect print server is compatible with the Windows system IPP-client software.

To set up a print path to an HP Jetdirect-connected Internet printer using the Windows 2000/XP IPP-client software, proceed as follows:

1.Open the Printers folder (click Start, select Settings, and select Printers).

2.Run the Add Printer wizard (double-click Add Printer), then click Next.

3.Select the option for a network printer and click Next.

ENWW HP Software Solutions Summary 24