HP 625n Gigabit Ethernet Print Server Tags Supported in a BOOTP/DHCP Boot file 2, Description

Table 3.1	Tags Supported in a BOOTP/DHCP Boot file (2 of 4)
Item		RFC	Description
		2132
		Option
sm		1	The subnet mask tag. The subnet mask will be used by
			the HP Jetdirect print server to identify the portions of an
			IP address that specify the network/subnetwork number
			and the host address.
gw		3	The gateway IP address tag. This address identifies the
			IP address of the default gateway (router) that the
			HP Jetdirect print server will use for communications
			with other subnets.
ds		6	DNS (Domain Name System) server’s IP address tag.
			Only a single name server can be specified.
lg		7	The syslog server’s IP address tag. It specifies the server
			that the HP Jetdirect print server sends syslog messages
			to. For more information, see Appendix A.
hn		12	The host name tag. This tag does not take a value but
			causes the BOOTP daemon to download the host name
			to the HP Jetdirect print server. The host name will be
			printed on the Jetdirect configuration page, or returned on
			an SNMP sysName request by a network application.
dn		15	Domain name tag. Specifies the domain name for the
			HP Jetdirect print server (for example, support.hp.com). It
			does not include the host name; it is not the Fully Qualified
			Domain Name (such as printer1.support.hp.com).
ef		18	Extensions file tag that specifies the relative path name of
			the TFTP configuration file.
			Note: This tag is similar to the vendor-specific tag T144,
			described below.
na		44	Tag for IP addresses of the NetBIOS-over-TCP/IP Name
			Server (NBNS). A primary and secondary server may be
			specified in order of preference.
lease-time		51	DHCP IP address lease duration time (seconds).
tr		58	DHCP T1 timeout, specifying the DHCP lease renewal
			time (seconds).

ENWW TCP/IP Configuration 44