HP 625n Gigabit Ethernet Print Server manual Assigning an IP Address, Setting Up Mac OS

Assigning an IP Address

Before you can set up a printer for LPR printing, assign an IP address to the printer or print server. Use the HP LaserJet Utility to configure the printer IP address as follows:

1.Double-click HP LaserJet Utility in the HP LaserJet folder.

2.Click the Settings button.

3.Select TCP/IP from the scrolling list and then click Edit.

4.Select the desired option. You can automatically obtain the TCP/IP configuration from either the DHCP server or the BOOTP server, or you can manually specify the TCP/IP configuration.

Setting Up Mac OS

To configure a computer for LPR printing, do the following:

1.Launch the Desktop Printer Utility.

2.Select Printer (LPR) and click OK.

3.In the PostScript Printer Description (PPD) File section, click Change... and select the PPD for your printer.

4.In the Internet Printer or the LPR Printer section, depending on your version of the Desktop Printer Utility, click Change....

5.Enter the printer's IP address or domain name for Printer Address.

6.Enter the queue name, if used. Otherwise, leave it blank.

Note	The queue name is typically raw. Other valid queue
	names are text, binps, auto, or a user-defined
	queue name (user-defined print queues can be set
	up through Telnet or the embedded Web server, see
	Chapter 4).

7.Click Verify to verify that the printer was found.

8.Click OK or Create, depending on your version of the Desktop Printer Utility.

9.Go to the File menu and select Save or use the resulting save dialog, depending on your version of the Desktop Printer Utility.

ENWW Configuring for LPD Printing 170