HP 625n Gigabit Ethernet Print Server manual Security Settings 2

Table 9.4	Security Settings (2 of 3)
Message		Description
SNMP Versions:		Specifies the SNMP versions enabled on the print server.
		Disabled: All SNMP versions are disabled on the print
		server. No SNMP access is allowed.
		1;2: SNMP v.1 and SNMP v.2c are supported, and SNMP
		v.3 is disabled, or not supported.
		1;2;3-na/np: SNMP v.1, v.2c, and v.3 are enabled. v.3 is
		enabled with the minimum security of no authentication
		(“na”) and no privacy (“np”).
		1;2;3-a/np: SNMP v.1, v.2c, and v.3 are enabled. v.3 is
		enabled with the minimum security of authentication
		enabled (“a”) but no privacy (“np”).
		1;2;3-a/p: SNMP v.1, v.2c, and v.3 are enabled. v.3 is
		enabled with the minimum security of authentication (“a”)
		with privacy (“p”) enabled.
		3-na/np: SNMP v.1 and v.2c are disabled. SNMP v.3 is
		enabled with the minimum security of no authentication
		(“na”) and no privacy (“np”).
		3-a/np: SNMP v.1 and v.2c are disabled. SNMP v.3 is
		enabled with the minimum security of authentication
		enabled (“a”) but no privacy (“np”).
		3-a/p: SNMP v.1 and v.2c are disabled. SNMP v.3 is
		enabled with the minimum security of authentication (“a”)
		with privacy (“p”) enabled.
SNMP Set Cmty Name:		Specifies whether an SNMP set community name has been
		configured on the HP Jetdirect print server. An SNMP set
		community name is a password for write access to SNMP
		control functions (SNMP SetRequests) on the HP Jetdirect
		print server.
		Not Specified: An SNMP set community name has not been
		set.
		Specified: A user-specified SNMP set community has been
		set.

ENWW HP Jetdirect Configuration Page 212