802.11 Wireless Settings
Wireless status, configuration parameters and error messages are listed in Table 9.3.
Table 9.3 | 802.11 Wireless Settings (1 of 3) |
|
|
Message | Description |
|
|
Status | Current 802.11 wireless configuration status. |
| Ready: A wireless connection to the network has been |
| established. |
| ● Infrastructure Mode: Associated with an Access Point |
| and authenticated on the network. |
| ● Ad Hoc Mode: Wireless communications established |
| directly with other network devices (Access Points are |
| not used in Ad Hoc Mode). |
| Initializing: The print server is booting up, performing |
| |
| Scanning: The print server is scanning for the specified |
| network. Status or error messages that may also be |
| displayed are listed below. |
| ● Infrastructure Mode: The print server is scanning on all |
| channels for a network (Access Point) with the specified |
| SSID. |
| ● Ad Hoc Mode: The print server is scanning on all |
| channels for a network with the specified SSID, or has |
| created a workgroup to which no one has joined. |
| Error: A wireless connection error has occurred that |
| prevents association or authentication with an Access Point |
| (Infrastructure Mode), or prevents a connection to an Ad |
| Hoc network. Status or error messages that may also be |
| displayed are listed below. |
Status/Error Messages
●NO SIGNAL DETECTED: (Infrastructure Mode only) The print server did not find an Access Point and did not detect a radio signal.
●SCANNING FOR SSID: The print server is scanning on all channels for devices on the specified SSID. Check your specified SSID, or check status of the Access Point (Infrastructure mode) or other wireless devices.
The print server will continue to scan for the specified SSID.
ENWW | HP Jetdirect Configuration Page 208 |
