HP 625n Gigabit Ethernet Print Server manual Settings for Access Control 2, High

Table 7.2		Settings for Access Control (2 of 2)
Settings			Level of Access Control
●	Unused protocols disabled		High
● HTTPS access enabled using			High security for non-trusted, professionally
	certificates issued by trusted		managed environments.
	sources		Access is limited to authenticated hosts that are
● Full-featured Jetdirect print			specified in the Access Control List. Encryption
			provides data privacy; network communication in
	servers configured for
			plain-text is not used.
	EAP/802.1x server-based
			CAUTION: Power-on settings (for example,
	authentication and encryption
● Full-featured Jetdirect print			configurations from a BootP/TFTP or
			DHCP/TFTP server) may change the print
	servers with SNMP v3
			server’s settings when it is power-cycled. Be sure
	enabled, SNMP v1/v2c
			to confirm your intended power-on settings.
	disabled
●	Telnet disabled
●	Passwords set
● The Access Control List
	contains specified entries and
	HTTP connections are
	checked
● Printer control panel locked

ENWW Security Features 184