3.Does a 40 ERROR appear on the printer’s control panel display?
The HP Jetdirect print server detected a break in the data communications. When this error occurs, the printer goes offline.
A break in communications may result from the physical network connection being disrupted or the server going down. If your printer has an Auto Continue feature that is disabled or off, you must press the appropriate key (Start or Pause/Resume, for example) on the printer after the communications problem is solved to put the printer back online. Turning the Auto Continue feature on forces the printer to reconnect without user intervention. However, this does not solve the disconnect problem.
4.Does an initializing (INIT) message appear on the display?
This is a normal message. Wait about 3 minutes for the message to clear, or another message to appear. If another message appears, see the printer’s documentation and configuration pages for additional information.
5.Does a message other than READY or the messages listed in this section appear on the display?
See your printer documentation for a complete list of control panel messages and corrective actions.
ENWW | Troubleshooting the HP Jetdirect Print Server 192 |
