Firmware upgrades for supported HP Jetdirect print servers may be installed over a network using one of the following firmware installation tools:
●HP Jetdirect Download Manager (Windows). HP Jetdirect Download Manager can be downloaded from HP online support at:
http://www.hp.com/go/dlm_sw
●HP Web Jetadmin may be used on supported systems. For more information on HP Web Jetadmin, visit:
http://www.hp.com/go/webjetadmin/
●The embedded Web server resident on the print server provides a firmware upgrade feature using your Web browser. For more information see Chapter 4.
●FTP (File Transfer Protocol) may be used to transfer a firmware upgrade image file to the print server. To start an FTP session, use the device IP address or host name. If a password is set, it must be entered to log into the device. After user login, typical FTP commands to upgrade the device are illustrated below:
ftp> bin ftp> hash
ftp> cd /download
ftp> put <firmware image filename; specify full pathname> ftp>######### <Wait for FTP to complete the download> ftp> bye
ENWW | Introducing the HP Jetdirect Print Server 13 |
