![](/images/new-backgrounds/1284053/28405365x1.webp)
¦¦ Troubleshooting for Anynet+
Problem | Possible Solution |
Anynet+ does not work. | ●● Check if the device is an Anynet+ device. The Anynet+ system |
| supports Anynet+ devices only. |
| ●● Connect only one receiver (home theater). |
| ●● Check if the Anynet+ device power cord is properly connected. |
| ●● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable |
| connections. |
| ●● Check whether Anynet+ |
| setup menu. |
| ●● Check whether the TV remote control is in TV mode. |
| ●● Check whether it is Anynet+ exclusive remote control. |
| ●● Anynet+ doesn’t work in certain situations. (Searching channels, |
| Operating, Plug & Play, etc.) |
| ●● When connecting or removing the HDMI 1.3 cable, please make |
| sure to search devices again or turn your TV off and on again. |
| ●● Check if the Anynet+ Function of Anynet+ device is set on. |
I want to start Anynet+. | ●● Check if the Anynet+ device is properly connected to the TV and |
| check if the Anynet+ |
| Setup menu. |
| ●● Press the TV button on the TV remote control to switch to TV. |
| Then press the TOOLS button to show the Anynet+ menu and |
| select a menu you want. |
I want to exit Anynet+. | ●● Select View TV in the Anynet+ menu. |
| ●● Press the SOURCE button on the TV remote control and select |
| a device other than Anynet+ devices. |
| ●● Press z, CH LIST, |
| the TV mode. (Note that the channel button operates only when |
| a |
The message Connecting | ●● You cannot use the remote control when you are configuring |
to Anynet+ device... | Anynet+ or switching to a view mode. |
appears on the screen. | ●● Use the remote control when the Anynet+ setting or switching to |
| view mode is complete. |
The Anynet+ device does | ●● You cannot use the play function when Plug & Play is in |
not play. | progress. |
The connected device is | ●● Check whether or not the device supports Anynet+ functions. |
not displayed. | ●● Check whether or not the HDMI 1.3 cable is properly connected. |
| ●● Check whether Anynet+ |
| setup menu. |
| ●● Search Anynet+ devices again. |
| ●● You can connect an Anynet+ device using the HDMI 1.3 cable |
| only. Some Some HDMI cables may not support Anynet+ |
| functions. |
| ●● If it is terminated by an abnormal situation such as disconnecting |
| the HDMI cable or power cord or a power failure, please repeat |
| the device scan. |
The TV program cannot | ●● Check whether the antenna jack on the recording device is |
be recorded. | properly connected. |
The TV sound is not | ●● Connect the optical cable between TV and the receiver. |
output through the |
|
receiver. |
|